XLGYQM-3KW High Voltage Enamel Continuity Tester

Execution Standard: GB/T4074.5-2008;

Inspection Standard: JB/T4279.13-2008

High Voltage Enamel Continuity Tester is suitable for testing the enamel continuity (number of pinholes per unit length of enameled wire samples) of round enameled wires with diameters from 0.050mm to 1.600mm.

Test Voltage Error: <5%

Steady-state Short-circuit Current: 25±5μA

Counting Frequency When Bare Wire Contacts: 500±10n/min

Voltage Drop Caused by 550MΩ Defect Resistance: <75%

Defect Detection Circuit Response Time: 5±1Ms

Operating Environment: Temperature 0 - 40 ℃, Relative Humidity ≤ 75%

External Power Supply: AC220V±5% 50Hz;

Power Consumption: ≤200W