Honing Oil Technical White Paper

I. Product Overview

HP-100 Honing Oil is formulated with Group III hydrogenated base oil as the matrix, compounded with nano-level extreme pressure anti-wear agents (containing sulfur-phosphorus-nitrogen composite system), metal passivators, and special defoaming agents. This product is certified by ISO 6743-7 standards and is specifically developed for modern precision honing processes, compatible with international mainstream honing equipment such as GF and Nagel.

II. Advantages
Process Adaptability
Workpiece surface roughness improvement rate of 40% (Ra≤0.2μm)
Abrasive stone life extended by 3-5 times (compared to traditional mineral oils)
Composite Functional Design
Functional Dimension Technical Implementation Solution Extreme Pressure Lubrication Micron-level Oil Film Formation Technology (≤2μm) Debris Management Dynamic Suspension Flushing System
III. Typical Applications
Ferrous Metal Processing: Engine cylinder block (HT250 material) honing efficiency increased by 25%
Non-ferrous Metal Processing: Aluminum alloy piston pin hole machining (roundness ≤0.005mm)
Special Material Processing: Ceramic matrix composite precision honing process
IV. Technical Parameters
Test Item Test Standard Technical Indicator
Kinematic Viscosity (40°C) ASTM D445 ***mm2/s
Flash Point (Open Cup) ASTM D92 ≥190°C
PB Value ASTM D2783 ≥800N
Copper Corrosion (100°C) ASTM D130 1a level
V. Usage Guidelines
Recommended oil change interval: 800 hours of continuous use or when monitored viscosity change >15%
VI. Packaging Specifications
Standard Packaging: 200L galvanized drum (net weight 170kg)
Custom Packaging: 20L drum