LAPC-9110T Laser Particle Counter

Product Overview

1. Light Source: Semiconductor Laser

2. Sampling Flow Rate: 28.3L/min

3. Minimum Particle Size: 0.1μm

4. Particle Size Channels: Six channels simultaneously count 0.1, 0.2, 0.3, 0.5, 1.0, 5.0μm

5. Display: Large LCD touch screen

6. Power Supply: Rechargeable lithium battery 16.8V

7. Data Storage: Can store at least 20,000 sets of data

Product Features

This instrument is a successful product developed in accordance with ISO 14644-1:2015 international standards, jointly with domestic universities and research institutions. The entire product features a 316L stainless steel housing. The laser sensor uses a full semiconductor laser and semiconductor photodiode receiver, ensuring light source stability and signal receiver accuracy. It significantly reduces stray scattered light within the scattering chamber and improves the sensor's signal-to-noise ratio. The LCD touch screen control ensures clear data display and convenient operation. The sampling pump is imported from the United States, and it includes a built-in differential pressure sensor for closed-loop flow control, maintaining a stable flow within the set range. This instrument can automatically determine various cleanliness levels based on customer-selected standards.

Application Scope

This product is widely used in medical, pharmaceutical, electronic, chemical, optical, food, cosmetics, biological products, aerospace industries, and various testing institutions for dust particle detection.

Main Technical Parameters

Light Source: Semiconductor laser, lifespan greater than 10 years >30,000 hours

Sampling Flow Rate: 28.3L/min (1ft3) ±5%, self-adjusting based on sampling tube length and resistance to maintain constant flow

Display Method: 155×85mm high-resolution LCD touch screen display, Chinese interface, real-time display, previous cycle display, real-time concentration display, displays time, date, measurement values, temperature, humidity, room number, sampling point, sampling count, status, and other parameters, 95% UCL calculation, directly displays particle concentration (particles/m3), three-level permission management, audit trail function.

Power Supply/Operating Power: Maximum power consumption :20W, built-in long-life lithium battery: can operate continuously for 6 hours, external charger can fully charge quickly (<4 hours)

Charger Power Supply: 100V～220V, 50/60Hz

Operating Time: 6 hours

Counting Modes: Cumulative value, difference value, concentration value

Testing Methods: Single, repeat, continuous, calculation, remote

Unit Conversion: Units can be converted to m3

Particle Size Channels: 0.1, 0.2, 0.3, 0.5, 1.0, 5.0μm, six channels count simultaneously. Particle sizes can be customized according to customer needs.

Sampling Cycle: 1～99999 (S), delay count: 0～99 (S), self-cleaning time: ≤10 (min)

Operating Environment: Temperature: 5～35℃, relative humidity: 20～90%RH, no condensation. Atmospheric pressure: 86-106KPa

Temperature and Humidity: Optional (1) Temperature: -15～50℃±1℃. (2) Humidity: 0～98%RH±5%

UCL Settings: Sampling points (A): 0～99 points settable. Sampling count per point (L): 0～99 times settable. Measurement location: 0-99999999

UCL Report: Complies with ISO14644-1, GB50073-2001, GMP(2010), FS209E

Data Storage: Can store 20,000 sets of data (circular buffer) (including particle size, data, environmental data, year, month, day, time, sampling volume, data location), data is not lost after power off.

Communication Interface: RS232, 115200 baud rate, USB interface

Alarm Settings: The instrument has level alarm function, can alarm for超標 in cleanrooms of classes 100, 1000, 10000, 300000, 1000000,同時符合新版GMP標準的A/B/C/D四個級別靜態和動態標準的測量四種標準切換測量

Zero Count: Complies with JJF-1190-2008 Dust Particle Counter Metrological Calibration Specification and ISO/FDIS21501-4:2018, fewer than 1 count every five minutes, overlap error 5% at 2,000,000 particles/cubic foot

Printing Function: Thermal printer

Weight: 7.6kg

Calibration: Can meet JJF-1190-2008 Dust Particle Counter Metrological Calibration Specification, GB/T6167-2007 Dust Particle Counter Performance Test Method, and ISO/FDIS21501-4:2018(E) Calibration Method for Light Scattering Dust Particle Counters in Cleanrooms, traceable to Shanghai Institute of Measurement and Testing Technology, can also be self-calibrated or calibrated by third-party national metrology institutions, traceable to the US National Institute of Standards and Technology (NIST). Our company has passed the national metrology standard assessment, and our standard dust particle counter has participated in national dust particle counter value comparisons involving provincial metrology institutions, and is used by relevant metrology testing institutions as a standard precision particle counter for dust particle counter metrological calibration.

Standard Configuration: Professional isokinetic sampling head, sampling stand with sampling tube, built-in printer, aluminum alloy case, operation manual, factory test report, zero count filter, charger, sampling stand, printer paper

Dimensions: 230*230*230 (mm) (excluding air nozzle, handle, and other accessories)