ECS-7000 Green Building Equipment and Energy Management System with Building Automation Solution

Overview of ECS7000S Green Building Equipment and Energy Management System

The ECS7000S Green Building Equipment and Energy Management System is a standardized BA energy-saving control system that integrates power distribution, equipment control, energy management, energy consumption measurement and analysis, safety alarms, and fieldbus communication into a unified intelligent成套設備的核心控制系統. It controls and manages mechanical and electrical equipment such as building fresh air units, air conditioning units, and cold/heat source systems. The ECS7000S system features standardized integrated controllers for fans, lighting, air conditioning, water pumps, and other mechanical and electrical equipment, installed within distribution cabinets. For different types of equipment, it includes built-in secondary motor circuit control, energy-saving control strategies, energy efficiency tracking, motor protection, and fieldbus communication interfaces. This allows most tasks that would typically require on-site completion—such as BA interface coordination, wiring, and controller debugging—to be finished before the distribution cabinets leave the factory, along with comprehensive factory inspections, thereby improving reliability. Once on site, the equipment only requires front-end device wiring and bus networking, enabling complex BA system installation and debugging to be easily completed without specialized調試人員.

ECS7000S Green Building Equipment and Energy Management System Selection:

ECS-7000S Building Equipment Energy Efficiency Monitoring and Energy Consumption Statistical Analysis Software

ECS-7000MG Network Controller

ECS-7000MB/Sewage Pump Energy Efficiency Controller

ECS-7000MF/Ventilation Fan Energy Efficiency Controller

ECS7000MKT/Air Conditioning/Fresh Air Unit Energy Saving Controller

ECS-7000MDF Chiller Energy Saving Controller

ECS-7000MZK Pipe Network Energy Saving Controller

ECS-7000MT Cooling Tower Energy Saving Controller

ECS-7000MLS Unit Energy Saving Controller

Product Features

● Integrated secondary circuit for air conditioning/fresh air unit electrical control boxes.

● Manual remote-automatic control, interlock control, fan status display, air duct temperature and humidity measurement, water valve adjustment, air damper control, filter status display, CO2 monitoring, humidification control, heat exchanger anti-freeze control, frequency converter control, external signal linkage.

● Real-time tracking and recording of unit operating efficiency.

● Provides motor protection functions including start-up timeout, overload, phase loss, imbalance, underload, leakage, and blockage.

● Self-diagnostic function, provides unit fault location and cause for quick equipment maintenance.

ECS-7000MD Chilled Water Pump Controller

Product Features

● Integrated secondary circuit for chilled water pump electrical control cabinet.

● Manual remote-automatic control, interlock control, pump unit status display, pump group **combination configuration and automatic wear balancing function

● Real-time tracking and recording of unit operating efficiency.

● Provides pump motor protection functions including start-up timeout, overload, phase loss, imbalance, underload, leakage, and blockage.

● Self-diagnostic function, provides unit fault location and cause for quick equipment maintenance.

ECS-7000MZK Cold and Heat Source Centralized Controller

Product Features

● Performs cluster control of cold/heat source equipment, chilled water pump groups, cooling water pump groups, and cooling tower groups.

● Real-time tracking and recording of unit operating efficiency.

Yachuan Services

1. Dedicated technical personnel to design system solutions and perform secondary system design optimization;

2. Specialized technical service personnel:

Guide or be responsible for on-site wiring during construction.

Adjust parameters for each device according to the construction environment to ensure suitability.

調試監控中心的本地系統和云平臺監控系統 based on the application environment.

Proactively coordinate with other monitoring systems for networking調試.

3. Conduct on-site technical seminars and provide free training for engineering technicians and maintenance personnel to master the performance of the equipment used, as well as the composition, debugging, and maintenance of the backend monitoring system and cloud platform;

4. In case of quality issues, if telephone support is insufficient, arrive on site within eight hours after notification; repair personnel will not leave until the故障 is resolved and the equipment is operating normally, confirmed by user signature;維修單 signed by users are uniformly archived by the company;

5. Products enjoy a "three guarantees" policy and終身售后服務; within one year, if quality issues arise due to non-human factors, the company provides free repair or replacement; after one year, free maintenance is provided for quality issues, with only cost charged for replacement parts;

6. Lifetime free upgrades for backend monitoring system software and cloud platform systems;

7. 24-hour technical support hotline for consultation, promptly solving practical problems during product use.

For product information or technical方案咨詢, contact Manager Liu: (13572979371 same number for WeChat), free provision of方案及產品資料