I. Introduction to Building Equipment Monitoring and Energy Management System

This system is suitable for energy-saving control and management of various mechanical and electrical equipment in buildings. The system's standardized dedicated controllers are designed to meet the control requirements of different mechanical and electrical equipment, integrating energy efficiency tracking, secondary circuits, motor protection, and BA control to form a standardized overall solution for energy-saving control and management of building equipment.

Based on historical building operation records, it manages and analyzes current and past operational processes to generate trend reports. The system platform includes multiple standard output interfaces such as MODBUS and RTDS real-time databases.

For more product information and solution quotations, please call.

For more product information or product pricing, please call our company.

Please contact Manager Zhang: 152 ---0290 ---6680 (same as VX) for faster direct response

We are committed to providing you with project drawing design optimization and configuration solution quotations!!!

System Product Models

IC-HL Gateway

Features: 1 network port, 2 RS485/RS232/network ports (multiplexed relationship). Network: 1 high-performance 100M/10M Ethernet interface. System: LINUX system. Processor: 1 core 300MHZ

IC-DPI Multifunctional Monitoring Terminal

Features: Real-time collection of on/off status, three-phase (I, U, KW, KWh, cosΦ, Hz) monitoring, residual current monitoring, 4-channel temperature monitoring, with RS485 communication

IC-DPL Intelligent Control Unit

Features: Remote monitoring of dual-power device operation status and parameters, with 4-8 channels of digital input/output and analog input/output. This system is used for remote operation, status setting, on/off position collection, under-voltage/over-voltage alarm, with RS485 communication

IC-SPD Multifunctional Collector

Features: Remote status monitoring and backup protection counting, SPD degradation monitoring, SCB power status monitoring, grounding status monitoring, lightning counting monitoring, with RS485 interface

IC-POM Drainage Pump Energy-Saving Controller

Monitoring of drainage systems meets the following requirements:

1. In the sump, a level gauge is installed to measure the water level, with the upper limit signal used to start the drainage pump and the lower limit signal used to stop the pump; an ultra-high level triggers an emergency alarm and starts dual-pump drainage;

2. Display of submersible sewage pump operation status and fault alarm;

3. When the main drainage pump fails, the backup pump should automatically start; 4. The integrated submersible sewage pump box allows manual and automatic mode switching;

5. Multiple pumps can be rotated based on cumulative operation time or start count

IC-POM Fan Energy-Saving Controller

Features: Monitoring of ventilation system equipment meets the following requirements:

1. Monitor the operation status, automatic/manual status, and cumulative operation time of each fan;

2. Control the timed start/stop of fans based on usage time;

3. Monitor fault alarm signals of fans;

4. Control the number and speed of fans based on air volume balance and pressure parameters in the service area;

5. In underground parking garages, control the number and speed of ventilation fans based on CO concentration or vehicle count;

6. For equipment rooms with high heat generation and ventilation requirements, such as power distribution rooms, control the start/stop, number, and speed of fans based on usage or indoor temperature monitoring.

7. Dual-purpose fans (normal and firefighting) are integrated into the system for normal control and automatically switch to firefighting control during emergencies.

IC-PO Elevator Energy-Saving Controller

IC-POM Air Conditioning Energy-Saving Controller

IC-ZM-4 4-Channel Lighting Energy-Saving Controller

IC-ZM-8 8-Channel Lighting Energy-Saving Controller

IC-ZM-12 12-Channel Lighting Energy-Saving Controller

Intelligent Configuration Screen YCS-LCD7

YCS-7002GW Gateway

PY900F Multifunctional Monitoring Terminal

PY900L Intelligent Control Unit

YCS-7000MB Drainage Pump Energy-Saving Controller

YCS-7000MF Fan Energy-Saving Controller

YCS-7000MU Elevator Energy-Saving Controller

YCS-7000MKT Air Conditioning Unit Energy-Saving Controller

YCS-7000MZM4 4-Channel Intelligent Lighting Energy-Saving Controller

YCS-7000MZM8 8-Channel Intelligent Lighting Energy-Saving Controller

YCS-7000MZM12 12-Channel Intelligent Lighting Energy-Saving Controller

ECS-7000MB

ECS-7000MF

ECS-7000MU

ECS-7000MKT

ECS-7000MZM4

ECS-7000MZM8

ECS-7000MZM12

IC-POM Fan Energy-Saving Controller Integrated Building Equipment Monitoring System

IC-POM Fan Energy-Saving Controller Integrated Building Equipment Monitoring System