Tianjin Zhijiang Pump Industry ZJ500QR Hot Water Submersible Pump Specialized for High-Temperature Hot Water

Model Description:

For example: ZJ500QJ(HR)1250-120/4-560KW

Here, 500 indicates a well diameter not less than 500 mm, Q represents submersible (initial letters of Chinese Pinyin), J: indicates for submersible well use, H: indicates stainless steel submersible pump, R: indicates hot water submersible pump. 1250 indicates a flow rate of 1250 m3/h; 120 indicates a head of 120 meters; /4 indicates 4-stage impeller series, 560KW: indicates the motor power is 560KW.

Tianjin Zhijiang Pump Industry ZJ500QR Hot Water Submersible Pump Application Scope

Suitable for high-temperature wastewater recycling. Such as: boiler high-temperature wastewater, high-temperature wastewater in water pipelines, high-temperature wastewater circulation in cooling pipelines, emergency repair departments for power, pumping and draining wastewater from heating pipelines, factory cooling water circulation, etc.

Technical Parameters

Outlet flange diameter 700 mm. Number of fixed bolts is 12, model 16*80 (8.8) grade, bolt center distance 325 mm. For user convenience in installation and use, a matching flange consistent with the unit's outlet is specially provided ex-factory; users are to weld the pump short pipe on-site themselves.

Tianjin Zhijiang Pump Industry ZJ500QR Hot Water Submersible Pump Permissible Medium Range

1. High-temperature industrial wastewater without impurities

2. Permissible working water temperature range: +5℃ - +125℃

3. Solid impurity content (mass ratio) not greater than 0.01%

4. pH value (acidity and alkalinity) 6.5—8.5. If the pH value is out of range, please inform us in advance so we can switch to stainless steel, tin bronze, or other corrosion-resistant materials.

5. Hydrogen sulfide content not greater than 1.5 mg/L

6. Chloride ion content not greater than 500 mg/L

7. The unit must be completely submerged in water

Tianjin Zhijiang Pump Industry ZJ500QR Hot Water Submersible Pump Motor Parameters

The submersible motor is lubricated with clean water. Before use, the motor cavity must be filled with clean water (Note: it must be filled completely, otherwise it will reduce the motor's service life. If water is forgotten, the motor will burn out quickly. For specific parameters, see the motor nameplate).

Motor protection grade: IPX8

Power supply: 380V/660V/1140V/3000V/6000V/10000V, 50HZ /60HZ. If customers require special voltage or frequency, please notify us in advance.

Materials

Pump casing materials include: cast iron 200HT; stainless steel or tin bronze. Specific materials are provided according to the technical agreement between both parties.

Pump shaft: stainless steel 2Cr13; duplex stainless steel; 17-4, etc. Depending on the environment, we provide different materials, which will be specified in the technical agreement.

Motor expansion adjustment bladder rubber material

Tianjin Zhijiang Pump Industry ZJ500QR Hot Water Submersible Pump Equipment Advantages

--- Easy installation, no complex infrastructure investment required, just place it in the pool for use;

--- Multi-stage impeller design, extremely low noise;

--- Built-in check valve to prevent water hammer impact;

--- High single-stage head, which reduces the overall unit height and increases operational stability. The pump shaft diameter is 450 mm, enhancing the shaft's torsional resistance. The shaft bush is made of natural rubber material for better wear resistance and is equipped with a hard shaft bush made of imported material.

Supply Scope

Submersible pump unit (including pump body and submersible motor) with built-in one-way check valve. One outlet matching flange. Twelve 16*80 (8.8) grade bolts. One operation and maintenance manual, one certificate of conformity, one packing list. External packaging is a wooden case.

The above model is for illustrative purposes only; online prices do not represent actual selling prices. Please call for specific pricing.