HZ-ZX Axle Pin Load Cell
Contact Info
- Add:徐州經濟開發區三環東路, Zip: 221128
- Contact: 周雷
- Tel:15262025165
- Email:11736527@qq.com
Other Products
HZ-ZX Axle Pin Load Sensor
User Manual
Xuzhou Haihe Hydrological Equipment Co., Ltd.
Address: Xuzhou Economic Development Zone
Tel: 0516-87939789
I. Features and Applications:
The axle pin sensor is a specialized sensor for measuring radial loads of components such as bearings and pulleys, or the tension of steel wire ropes. It can be installed in structures to replace pulley pin shafts for radial force measurement. Depending on the application, it can be conveniently installed in hooks, rigging shackles, movable pulleys (sets), fixed pulleys (sets), wedge sockets, wire rope sockets, marine rigging, turnbuckles, rod ends, fork joints, connecting forks, lifting eyes, and the axle holes of steel wheels. It not only serves the function of replacing the original axle but also acts as a weighing and force measurement sensor, thereby greatly simplifying the mechanical components of the entire weighing and force control system.
II. Product Structure Diagram:
III. Technical Parameters:
Parameter | Unit | Technical Specifications |
Sensitivity | mV/V | 2.0±0.01 |
Nonlinearity | ≤ %F·S | ±0.05 |
Hysteresis | ≤ %F·S | ±0.05 |
Repeatability | ≤ %F·S | ±0.03 |
Creep | ≤ %F·S / 30min | ±0.03 |
Zero Output | ≤ %F·S | ±1 |
Zero Temperature Coefficient | ≤ %F·S / 10℃ | ±0.02 |
Sensitivity Temperature Coefficient | ≤ %F·S / 10℃ | ±0.02 |
Operating Temperature Range | ℃ | -20℃ ~ +80 ℃ |
Input Resistance | Ω | 380±2Ω |
Output Resistance | Ω | 350±2Ω |
Safe Overload | %F·S | 150%F·S |
Insulation Resistance | MΩ | ≥5000 MΩ (50 VDC) |
Recommended Excitation Voltage | V | 10V ~ 15V |
The transmitter is a conversion and output device that converts the millivolt signal generated by the load sensor into a 4-20mA current signal with strong anti-interference capability and long transmission distance.
Connection Between Transmitter and Load Sensor
Load Sensor (Four-Core) | 3-Green | 4-White | 1-Red | 2-Black |
Transmitter | S+ | S- | E+ | E- |
Connection Between Transmitter and Instrument
Instrument Terminal | +24V | G | R0 |
|
Transmitter | 24V | GND | OutA |
|
V. Precautions
1. Pay attention to the wiring definitions to avoid incorrect connections.
2. The arrow direction on the sensor indicates the force direction. Do not deviate from this angle to prevent inaccurate measurements or damage to the sensor.
3. Install the positioning buckle to prevent the sensor from shifting or rotating.
| Industry Category | Instruments & Meters/Mechanical Quantity Instruments/Other Mechanical Quantity Instruments |
|---|---|
| Product Category | |
| Brand: | 徐州海河水文 |
| Spec: | HZ-ZX |
| Stock: | 1000 |
| Manufacturer: | |
| Origin: | China / Jiangsu / Xuzhoushi |
