Actmix
ETU-80GE F140
ETU-75GE F140
ETU-75PE F140
ETU-75GN F140

Series: Accelerator

Chemical name of active ingredient: N,N - Ethylene thiourea
Polymer carrier: EPDM
NBR
Product form: White granules or flakes
Density: approx. 1.20g/cm3

Properties and Applications

Actmix ETU-80GE F140 is a slow rubber vulcanization accelerator with short scorch time, long vulcanization speed and a tendency to scorch. It is generally not used alone, and can be used in combination with other accelerators such as dithiocarbamates or thiazoles to reduce the dosage of other accelerators and prevent rubber compound from blooming. It is commonly used in neoprene and chlorohydrin rubber, etc., enabling the rubber compound to vulcanize quickly while remaining safe from scorching, and improving the physical and mechanical properties of the rubber compound. Due to its low promoting efficiency, it is rarely used in other diene rubbers except CR, CO and CPE compounds.

Detailed Introduction

Dosage: Under normal circumstances, the addition amount is 0.5-2.0 phr.
Application: General accelerator for CR, CO, CPE, used in small quantities in EPDM.
Packaging: Cartons lined with PE bags, net weight 25KG per carton; 600kg per pallet.
Storage stability: Store in a sealed, cool, dry and well-ventilated place. The recommended shelf life of the product is two years.
Disposal: It is recommended to install exhaust ventilation in the working area of chemical additives during rubber processing. For further disposal information, please refer to the safety data sheet of Actmix ETU-80GE F140.