Polyurethane Anti-Spill Skirt Y-Type Double Seal Guide Chute Coal Retaining Leather

Guide chute anti-spill skirt, Y-type anti-spill skirt, T-type anti-spill skirt. Supply various models of anti-spill skirts.

The anti-spill skirt consists of a vertical plate and side plates. The side plates have excellent flexibility, and the bottom surface of the vertical plate is an arc surface that contacts the belt. The side plates and vertical plate are integrated, providing a double sealing effect with good sealing performance. It also offers the advantages of wear resistance and not damaging the belt.

The side seal can be adjusted in height according to the distance between the belt edge and the guide chute until it is appropriate. The high-quality side seal combines well with the belt, ensuring it does not exceed the belt edge and avoids being cut. The sealing groove of the side seal adopts a single-sided arc transition, which prevents the side seal from being cut when the belt deviates and allows it to automatically return to its original state.

There are two types of tightening methods: butterfly nut locking and handle locking. They are easy and quick to install and remove. The pressure on both sides of the angle steel can be adjusted independently to ensure even pressure and prevent the side seal from falling off.

Classification of anti-spill skirts:

Anti-spill skirts are divided into Y-type and T-type anti-spill skirts. These two types are also known as double-seal anti-spill skirts. They have inner and outer layers, with polyurethane blocks thermally vulcanized at the bottom. The addition of polyurethane significantly enhances the wear resistance of the anti-spill skirt, while the rubber seals the guide chute and the belt.

It is also important to note that the rubber and polyurethane of the anti-spill skirt must be thermally vulcanized together. In contrast, cold bonding may cause the polyurethane to detach after long-term use.