Product Introduction

      The NDXZ series variable frequency series resonance system consists of a variable frequency power supply, excitation transformer, reactor, and capacitive voltage divider. The capacitance of the test object and the reactor form a series resonance connection; the voltage divider is connected in parallel with the test object to measure the resonant voltage across it and provide overvoltage protection signals. The frequency-modulated power output is coupled to the series resonance circuit through the excitation transformer, supplying the excitation power for series resonance. The variable frequency series resonance test device operates on the principle of series resonance, using the excitation transformer to stimulate the series resonance circuit. By adjusting the output frequency of the frequency converter controller, the circuit inductance L and the test object capacitance C achieve series resonance, with the resonant voltage being the voltage applied to the test object. The variable frequency resonance test device is widely used in industries such as power, metallurgy, petroleum, and chemical engineering, and is suitable for acceptance and preventive tests of high-capacity, high-voltage capacitive test objects.

Product Features

☆ Cables with voltage levels of 35kV and below are used in large quantities, resulting in heavy testing workloads. Therefore, such withstand voltage test devices are compact, lightweight, and portable, leading to the development of portable cable withstand voltage test systems.

☆ This system requires that no single component weighs more than 30kg for on-site handling by one person, and no more than 60kg for two people, making it suitable for on-site transportation.

☆ The power supply uses 220V single-phase or 380V single-phase power, making it convenient for on-site power access.

☆ The reactor section uses dry-type epoxy resin casting, ensuring aesthetic appeal and reliability, and meets the requirements for various types of cables.

☆ For withstand voltage tests on cables with voltage levels of 110kV and above, oil-immersed reactors are used. For components weighing over 100kg, our company's specialized small electric hoist can be optionally configured.

☆ Simple operation, compact size, and lightweight design make it highly convenient for on-site use and transportation (volume and weight are approximately 1/10 to 1/30 of traditional test transformers).

☆ Low requirements for on-site power supply.

☆ Excellent test equivalence.

☆ Complies with national standards, featuring peak monitoring functionality and real-time monitoring of high-voltage test waveforms.

☆ One-click mouse knob operation with a large LCD screen, making it "fool-proof" and easy to use.

☆ Equipped with a built-in micro printer for printing and saving test data at any time.

Product Parameters

☆ Resonant voltage waveform: Sine wave, waveform distortion rate <1.0%.

☆ Output frequency: 30～300Hz.

☆ Operating mode: Continuous operation time of 60 minutes at full power output.

☆ Quality factor: 30～90.

☆ Input power supply: Single-phase 380/220V±10%, 50Hz±5%.

☆ Ambient temperature: -10℃～+50℃.

☆ Relative humidity: <95%, no condensation.

☆ Scope of application:

    1) Cable variable frequency resonance device;

    2) Generator power frequency withstand voltage test device;

    3) AC withstand voltage test device for substation electrical equipment;

    4) Resonant step-up device for CVT testing.